Efficient Open-Frame Diesel Generator Sets: The Reliable Power Solution Preferred by Buyers
As a core power supply equipment for industrial production and emergency support, high-efficiency open-frame diesel generators have become the preferred choice for buyers due to their stable performance and high cost-effectiveness. This equipment features an open-frame structural design, requiring no additional protective enclosure, and offers both easy installation and accessible maintenance, making it suitable for various power supply scenarios.
Core Attributes and Parameters
The unit follows ISO8528-2005 and GB/T2820-2009 standards, with a rated power of 58KW and standby power of 65KW, a speed of 1500 r/min, and frequency stable at 50Hz. Fuel consumption is as low as 206g/kW·h, equipped with a 3.9L four-stroke diesel engine and a brushless generator, with voltage fluctuation ≤0.5% and steady-state voltage regulation ±1%, meeting the power supply requirements of precision equipment. The total weight of the unit is 1100kg, dimensions are 2300×870×1413mm, suitable for various installation sites.
Core Features and Advantages
The high-efficiency open-frame diesel generator set adopts high-pressure common rail injection technology and can meet the National III emission standards without after-treatment, highlighting its environmental compliance. The integrated design reduces the number of parts by 40% compared to similar products. The forged steel crankshaft and camshaft enhance structural strength, significantly lowering the failure rate, with a service life of 15,000 to 30,000 hours. The Holset wastegate valve boosts power output, and the turbocharging system is suitable for harsh environments at altitudes ≤1000m, operating stably even under high temperature and high humidity conditions.
Features and Application Scenarios:
The equipment is equipped with an LCD digital display controller that supports automatic start/stop and fault alarms, with dual protection against overload and low oil pressure. The high-efficiency open-frame diesel generator set is widely used as a backup power source in factories, ensuring uninterrupted production lines; in areas without a power grid, such as mines and construction sites, it serves as the main power source to drive heavy equipment; it is also suitable for emergency power supply in critical locations like hospitals and data centers, with a rapid start within 10 seconds to prevent losses. In addition, its mobility makes it suitable for temporary power supply scenarios such as emergency rescue and field engineering.
Purchasing high-efficiency open-frame diesel generator sets not only provides a 1-year or 1,000 operating hours quality guarantee, but also comes with nationwide 24-hour after-sales service support, offering significant overall cost-performance advantages.
FAQ
Q: What should be considered when selecting the power rating for this high-efficiency open-frame diesel generator set?
A:A 20%-30% redundancy should be reserved based on the total actual load. For inductive loads (such as motors), a 50% reserve is recommended. Models with a commonly used power of 58KW are suitable for small to medium-sized factories, construction sites, and similar scenarios, helping to avoid insufficient power or wastage.
Q: What are the maintenance cycle and costs of the equipment?
A: The engine oil and three filters need to be replaced every 250 hours, while daily maintenance only requires checking the fuel, coolant, and battery. Maintenance costs are low, the failure rate of key components is low, and long-term use is more economical.
Q: Compared to the silent type, what are the differences in suitable scenarios for an open-frame structure?
A: Open-frame designs are more suitable for outdoor construction sites, mines, and other environments with lower noise restrictions, and they are easier to install and maintain; if used in residential areas or hospitals, they can be paired with silencers to reduce noise.
Q: What are the requirements for fuel storage and compatibility?
A:Compatible with 0# light diesel, the fuel storage period can reach 1-2 years. It should be stored in a sealed container to prevent impurities from mixing in, and in high-temperature environments, it is recommended to use a fuel cooling device.
Q: What specific site requirements are there for installing high-efficiency open-frame diesel generator sets?
A: The site must be level and solid, with a load-bearing capacity of no less than 1,200 kg/㎡ (to accommodate a machine weighing 1,100 kg), and an operation and maintenance space of at least 1.5 m should be reserved. It should be kept away from flammable and explosive materials, with adequate rain and sun protection, while ensuring good ventilation to prevent the accumulation of exhaust fumes.
Hot Tags: high-efficiency open-frame diesel generator set, China high-efficiency open-frame diesel generator set suppliers
