| Model: | specification： | capacity： | Work pressure-resistant： | Maximum withstand pressure： | Oil output： |
| DL2601B | 600CC | 21oz | 4500PSI | 10000PSI | 3oz/40 times |
Manual grease guns are powered by human power and are operated by means of a lever or lever, among other things. For example, when the lever is pressed down, the piston is pushed to move in the barrel and the grease is squeezed, so that the grease is squeezed out through the grease nozzle of the tip and injected into the lubrication part of the equipment.
Manual grease gun external structure handle: used for the operator to apply pressure, by pressing or pulling to drive the grease gun to work, tip: connect the barrel and grease nozzle, grease nozzle is divided into a pointed and flat nozzle, the nozzle is suitable for some hard-to-reach parts, and the flat nozzle is suitable for general lubrication points. Barrel: It is a container for storing grease and at the same time a channel for piston movement. Handle: Some grease guns drive the piston movement by pulling the handle to achieve oil suction and oil filling operations.
The internal structure of the grease gun: Leather bowl: acts as a seal, prevents the grease from leaking, and at the same time pushes the grease forward when the piston is moving. Spring: Assists in the return of the piston to the initial position after pressing or pulling the handle in preparation for the next operation. Steel balls: Cooperate with springs to form a one-way valve structure, which is used to control the flow direction of the grease and ensure that the grease can only be extruded in one direction and will not flow back. Exhaust screw: used to exhaust the air in the barrel to avoid the air affecting the oil filling effect, when there is air in the gun, the exhaust screw can be opened for exhaust operation. Single lever grease gun: simple structure, easy to operate, suitable for some small mechanical equipment and occasions with low requirements for oil injection pressure. Double-lever grease gun: It has a higher oil filling pressure and can more easily inject grease into hard-to-reach parts such as the deep joints of the excavator. High-pressure self-priming grease gun: It has a self-priming function, which can suck up the butter more conveniently and improve the oil filling efficiency. Advantages: The operation is relatively simple, no additional power source is required, the equipment is light and simple, easy to carry, suitable for all kinds of non-air source places, and can be filled with grease for the equipment in time in the field, small maintenance shops and other places.
FAQ
Q: How to fill butter correctly?
A: Unscrew the back cap of the barrel, push out the piston, fill the barrel with butter cubes to make sure it is filled with no air, and then tighten the back cap
Q: What should I do if the oil output is not smooth?
A: Check whether the piper head is blocked, unscrew it and clean it; Confirm that the piston seal is intact, and replace the sealing ring if there is air leakage; If the butter is too hard, it can be softened first.
Q: How do I care for it after use?
A:Wipe the gun body with a cloth, remove the tip to clean up the residual butter, apply a small amount of oil to the piston to prevent rust, and store in a dry place.
Hot Tags: manual grease gun, China manual grease gun suppliers
