Boutique Paint Guns
High-quality paint spray guns use compressed air to atomize the paint into tiny paint droplets, which are then sprayed onto the surface of the object under the drive of the airflow. When the compressed air is discharged from the air holes of the air hood, a negative pressure is formed at the paint nozzle, which exerts suction on the paint. The sucked paint is then sprayed out in the form of atomized paint under the action of the compressed air. High-quality paint spray guns are mainly composed of a nozzle, a spray cap, a needle valve and a gun body, and need to be connected to an external air pressure device, such as a pressure barrel, a pressure tank, a pump, etc.
| Product parameters | Model: | W-71S-1.5 | Feeding method: | Suction on the formula |
| Nozzle diameter: | 1.5mm(0.059) | Jet Cap: | 3 | |
| Atomization air pressure: | 3.0(43) | Paint output: | 180ml/min | |
| Air Consumption: | 165L/min(5.8) | Spraying width: | 170mm(6.7) | |
| Paint capacity: | PC-2(600ml) | Weight: | 450g(1.0) |
Manual spray gun: requires manual operation, high flexibility, suitable for various small-scale spraying work and occasions requiring delicate operation. Including gravity type, pressure feed type, suction type and other types. Among them, the gravity type manual spray gun uses gravity to pull the paint from the upper pot to the lower nozzle, and then uses wind power to atomize and spray it out, which is suitable for small area repair; the pressure feed type manual spray gun uses an external paint supply pump or pressure tank and pressure barrel to supply paint, and can supply paint to several spray guns at the same time, which is more suitable for large area or continuous operation; the suction type manual spray gun uses high-speed airflow to create a vacuum state in the spray gun, generate suction to suck the paint from the pot to the nozzle and atomize it and spray it out, which is suitable for large area spraying.
Compared with traditional manual painting, the efficiency of spray guns is 5-10 times higher than brushing, and can quickly complete large-area spraying work, saving time and manpower and material costs. Fine spray guns can spray paint evenly on the surface of the object to be painted, forming a delicate, smooth, and uniform coating film, which improves the quality and appearance of the coating. Spray guns can flexibly adjust parameters such as mist width, spray volume, and gas volume to meet the spraying needs of surfaces of objects of different shapes, sizes, and materials, and adapt to various complex spraying scenes.
Fine paint spray guns are used for spraying primer, topcoat, varnish, etc. on cars, which can provide good protection and beautiful appearance for cars. Surface painting of furniture makes it more wear-resistant, corrosion-resistant and decorative. Paint spray guns can also be used for spraying interior and exterior walls, doors, windows, railings, etc. of buildings to achieve decoration of various colors and effects.
FAQ
Q: What should I do if the paint from the spray gun comes out unevenly?
A:Check whether the nozzle is clogged first, and if it is clogged, clean it with a special tool or replace the nozzle directly; At the same time, pay attention to the angle, distance and movement speed of the spray gun when painting, keep it perpendicular to the object to be sprayed, the distance is about 15 - 20 cm, and the moving speed is 30 - 50 cm / second at a constant speed.
Q: How to solve the oil leakage situation in the paint spray gun?
A:Check whether the seal is damaged, and replace it in time if there is a problem; Check the painting pressure, too high pressure will lead to oil leakage, you need to adjust the pressure to the appropriate range; In addition, if the paint is too thick, it is also easy to cause oil leakage, so you can add thinner appropriately to adjust the consistency.
Q: How to choose the right paint gun?
A: According to the choice of spraying object, such as the W-71 gun with a 1.3mm nozzle can be selected for metal parts, the W-77 gun with a 2.0mm nozzle for wooden parts, and the 1.0mm fine-bore gun with a W-71 for plastic parts; Considering the nature of the coating, high-viscosity coatings can be selected with large-diameter nozzle spray guns or diluted in advance; It is also necessary to pay attention to the brand reputation and durability of the spray gun.
Hot Tags: boutique paint guns, China boutique paint guns suppliers, wall colour spray machine, best hvlp spray gun, paint gun machine price, spray paint gun for furniture, professional spray paint machine, best drywall texture sprayer
