Installation
Check whether the appearance of the pressure barrel is damaged, cracked, etc., and ensure that the accessories are complete, including the pressure barrel body, inlet and outlet joints, pressure gauges (some of which are), etc.
According to the use scenario and equipment requirements, the pressure drum is installed in a suitable location, which is generally required to be installed in a stable, dry, well-ventilated place that is easy to operate and maintain. If it is a pressure barrel for a water purifier, it is usually installed below or next to the main unit of the water purifier.
Follow the instructions in the manual to correctly connect the inlet and outlet of the pressure drum with the pipes of the related equipment. Make sure the connection is secure when connecting to prevent water leakage.
aeration
New pressure barrels or pressure barrels that have not been used for a long time need to be inflated before use. Generally, there will be an air port on the side or top of the pressure barrel, similar to the valve of a bicycle tire.
Use a special pump or inflator to inflate according to the rated working pressure marked on the pressure barrel. Usually, the inflation pressure of the water purifier pressure barrel is about 0.4-0.8MPa, which may vary depending on the brand and model, so be sure to check the product manual to confirm the accurate value.
Inflation should be done slowly, observe the pressure gauge (if any) while inflating, and stop inflating when the specified pressure is reached.
use
When it is time to use the water in the pressure bucket, turn on the device or faucet connected to the pressure bucket outlet. Under the action of air pressure in the barrel, the water is pressed out and flows to the consumer end.
Control the size of the water flow and the time of use according to the actual demand. During use, the pressure in the bucket gradually decreases and the water flow slows down accordingly.
Maintenance & Inspection
Regularly inspect the appearance of the pressure drum to see if there are any abnormalities such as water leakage and deformation. If a water leak is found, close the relevant valve in time, find the leak point and repair or replace the damaged parts.
Check the pressure of the pressure drum at regular intervals (e.g., several months). If the pressure drops significantly and is lower than the rated working pressure, it needs to be inflated to the specified pressure in time.
FAQ
Q: How much water can a 50 liter pressure bucket hold?
A:The actual water volume is about 40-45 liters, and the air pressure space in the drum is reserved for pressure stabilization.
Q: How often does a pressure drum need to be inflated?
A: Check the air pressure every 3-6 months under normal use, and when the air pressure is insufficient (the water outlet slows down), charge it to 0.2-0.3MPa with a pump.
Q: Can you offer samples?
A: What should I do if the water from the pressure barrel smells?
Hot Tags: 50 litre pressure drum, China 50 litre pressure drum suppliers
